• TS-81000

DC—1GHz (50Ω),DC—500MHz(1MΩ,被動探頭為選件),4通道
清晰光跡與高分解度彩色顯示800 x 480點
多項輸出介面與文件功能: 內置印表機, LAN介面, ATA卡檔, 視頻輸出(NTSC/VGA)

規格:

Display section
	Type	5.8-inch color LCD (800 x 480 dots) 8 div x 10 div (60 dots/div, Graticule selectable)

Storage CRT
	Type		2-inch dia., CCD scan converter tube (380,000 pixels)
	Persistence characteristics
		Fastest writing speed	10 div/ns
		Persistence time	Variable between 0 and infinity

Storage CRT
	Type		2-inch dia., CCD scan converter tube (380,000 pixels)
	Persistence characteristics
		Fastest writing speed	10 div/ns
		Persistence time	Variable between 0 and infinity

Vertical deflection system (Y axis)
	Mode			CH1, CH2, CH3, CH4, ADD (CH1±CH2), ALT/CHOP (555kHz±1%)
	CH1,2
		Sensitivity range
			50W	5mV/div - 1V/div 8 steps (1-2-5)
			1MW	5mV/div - 5V/div 10 steps (1-2-5)
		Variable		Adjustable to less than 1/2.5
		Accuracy		±2%
		Frequency bandwidth (-3dB)
			50W	TS-81000: DC - 1GHz (10mV - 1V/div)
				TS-80600: DC - 600MHz (10mV - 1V/div)
				DC - 500MHz (5mV - 9.9mV/div)
			1MW (Passive probe model SS-101R is optional)	DC - 500MHz (10mV - 5V/div) at the tip of SS-101R probe
				DC - 350MHz (5mV - 9.9mV/div) at the tip of SS-101R probe
		Rise time		TS-81000 TS-80600 350ps (50W 10mV - 1V/div) 583ps (50W 10mV - 1V/div) Calculated from freq. Bandwidth x rise time = 0.35
		Offset voltage		5mV - 50mV/div: ±1V 100mV - 500mV/div: ±10V 1V - 5V/div: ±100V
		Offset accuracy		±(1.5%+0.5% of full scale + 1mV)
		Input RC		50W: ±2% 1MW: ±1% // 16pF (DC 1MW 5mV - 5V/div, AC 1MW 100mV - 5V/div)
				1.2MW ±1.0% // 16pF (AC 1MW 5mV - 50mV/div)
		Input coupling		DC 50W, DC 1MW, AC 1MW, GND
		Max. input voltage		50W: 5Vrms 1MW: 250Vmax (DC + Peak AC, 5kHz or less)
	CH3, CH4
		Sensitivity range		100mV/div, 500mV/div
		Accuracy		±2%
		Frequency bandwidth (-3dB)		DC - 500MHz
		Offset voltage		100mV/div: ±1V 500mV/div: ±5V
		Input RC		1MW: ±1.0% // 16pF
		Input coupling		DC, AC
		Max. input voltage		1MW: ±250Vmax (DC + Peak AC, 5kHz or less)
	ADD
		Frequency bandwidth (-3dB)		TS-81000 TS-80600 DC - 1GHz (10mV - 1V/div) at 50W input DC - 600MHz (10mV - 1V/div) at 50W input
	Lower cutoff for AC couple			10Hz (-3dB)
	Bandwidth limiter			20MHz 200MHz
	CH skew			Adjustable CH1 to CH4 (1MW)
	Probe sense			10:1, 100:1 detection
	Signal delay time			20ns
	Trace separation			More than 4div

Triggering
	A triggering
		Frequency	TS-81000 TS-80600 DC - 1GHz DC - 600MHz
		Signal sources	CH1, CH2, CH3, CH4, LINE
		Coupling	DC: DC - fmax AC: 100Hz - fmax HF-REJ: Attenuated at 10kHz or more LF-REJ: Attenuated at 10kHz or less
		Slope	+,-
		Sensitivity	DC - 10MHz 0.4div - 100MHz 1.0div - fmax 2.0div 50W 5mV/div - 9.9mV/div fmax: 500MHz 50W 10mV/div - 1V/div fmax: 1GHz (TS-81000) 50W 10mV/div - 1V/div fmax: 600MHz (TS-80600)
	B triggering
		Frequency	DC - 500MHz
		Signal sources	CH1, CH2, CH3, CH4
		Coupling	DC: DC - 500MHz AC: 100Hz - 500MHz HF-REJ: Attenuated at 10kHz or more LF-REJ: Attenuated at 10kHz or less
		Slope	+,-
		Sensitivity	DC - 10MHz 0.4div - 100MHz 1.0div - 500MHz 2.0div
	TV triggering		NTSC, PAL, CUSTOM Line select (1 to 3,000), Field select (1,2,4,8) CUSTOM (including HDTV)
		Slope	+,-
		Sensitivity	1.5 - 8.0div TV clamp available
	Event trigger
		Count mode	Range:1 - 65,535 Max. count frequency: 50MHz
		Burst mode	Range: 0.15 ms - 9.99 s

Horizontal deflection system (X axis)
	Horizontal display		A, ALT, B, X-Y
	A sweep
		Sweep mode	AUTO, NORMAL, SINGLE
		Max. sweep rate	200ps/div(TS-81000) 500ps/div(TS-80600)
		Range	2ns - 200ms/div 25 steps, 1-2-5 (TS-81000) 5ns - 200ms/div 24 steps, 1-2-5 (TS-80600)
		Variable	2ns - 600ms/div (TS-81000) 5ns - 600ms/div (TS-80600)
		Accuracy I (*1)	±2% (5ns - 200ms/div) over center 8div ±3% (2ns/div) over center 8div (TS-81000)
		Accuracy II (*1)	±5%(5ns - 200ms/div) any 2div within center 8div ±6% (2ns/div) over center 8div (*1) 20ns or 1div for the beginning of the sweep and 20ns for the end of sweep should be excluded. Add 1% when VARIABLE is ON
	B sweep
		Delay method	Triggered delay (TRIG'D DELAY) Continuous delay (RUNS AFTER DELAY)
		Max. sweep rate	200ps/div (TS-81000) 500ps/div (TS-80600)
		Range	2ns - 20ms/div 22 steps, 1-2-5 (TS-81000) 5ns - 20ms/div 21 steps, 1-2-5 (TS-80600)
		Accuracy I (*2)	±2% (5ns - 200ms/div) over center 8div ±3% (2ns/div) over center 8div
		Accuracy II (*2)	±5% (5ns - 200ms/div) any 2div within center 8div ±6% (2ns/div) over center 8div (TS-81000) (*2) 20ns or 1div for the beginning of the sweep and 20ns for the end of sweep should be excluded.
	Dual delay		Available
	Sweep magnification		x 10
	Delay jitter		Less than 1/50,000
	Hold off time		Variable 1 sec. max.

X-Y
	X axis		CH1
		Sensitivity	Same as CH1
		Frequency bandwidth	10MHz (-3dB)
	Y axis		CH1, CH2, CH3, CH4
		Sensitivity	Same as each CH
		Frequency bandwidth	Same as each CH
	X-Y phase difference		Within 3° (DC - 5MHz)

CAL signal
	Waveform	Square-wave
	Frequency	1kHz ±0.1%
	Output voltage	0.6V ±1%

CH2 OUT
	Amplitude	20mV/div ±20% (50W)
	Frequency bandwidth	500MHz(-3dB) 50W, 10mV/div (TS-81000) 300MHz(-3dB) 50W, 10mV/div (TS-80600)
	Output resistance	50W ±10%

Z AXIS IN
	Intensity modulation voltage	0.5Vp-p
	Polarity	Dark with positive voltage and brighter with negative voltage
	Frequency range	DC - 5MHz
	Input resistance	5kW ±20%
	Max. Input voltage	±40V

Probe power supply
	Connectors	2
	Suitable probes	SFP-5A, SFP-4A, SS-250, SS-240A

Auto Setup
	Auto Setup	Input sensitivity, Offset, TIME/DIV, Trigger level Amplitude: 30mV - 35V Frequency: 50Hz-200MHz

Cursor measurement
	Dt	Relative time difference measurement with cursor Resolution: 1/60 div
	DV	Relative voltage difference measurement with cursor Resolution: 1/60 div

Frequency counter
	Frequency bandwidth	2Hz - 1GHz (TS-81000) 2Hz - 600MHz (TS-80600)
	Digit	6 digits, accuracy ±0.01%

Clock
	Display	Month/Date/Time/Minute
	Accuracy	±50ppm

Interface
	Remote control	10Base-T (Ethernet)
	PC card slot	ATA card available (PCMCIA Type II)
	External monitor out	VGA WIDE
	NTSC output (Composite, S out)	Amplitude: 1 Vp-p ± 0.3 V 75W Output resistance: approx. 75W (AC coupling)
	Built-in printer	Line thermal printer Paper size: width 112mm, length 25m

Power supply
	Voltage range	100V - 240V AC 50/60Hz
	Power consumption	200VA max. (with built-in printer operation)
	Power consumption in the Standby mode	Approx. 5VA max.

Weight and dimensions
	Dimensions	Approx. 198H x 332W x 406Lmm (accessories and projections are not included)
	Weight	Approx. 10kg (accessories and options are not included)

Environmental conditions
	Operating range temperature	0°C - +40°C +5°C - +40°C (Built-in printer operation temperature)
	Humidity	90%/+40°C
	Performance guaranteed temperature	+10°C - +35°C
	Preheating time	These specifications are guaranteed after power has been on for 30 minutes or longer.
	Storage range temperature	-20°C - +60°C/80% RH
	Operating	2,000m, air pressure of approx. 79kPa
	Not operating	15,000m, air pressure of approx. 12kPa

Accessories
	Instruction manual (1), Power cord (1), Thermal printer paper (1)