岩通多功能電表(IWATSU)
最新消息公司簡介銷售設備代理廠牌下載專區技術應用聯絡方式
岩通多功能電表(IWATSU)
VOAC7523/22/20/21A
  • VOAC7523/22/20/21A

  • 高分解度 509999
    最高速度 100次/秒 顯示達50999
    强大的运算功能
    雙顯示(Dual Display)
    雙功能(Dual Function)
    隔離通道CH-B的DC V输入(VOAC7520/23)
    4端子/2端子電阻測量(VOAC7522/21A)
    低價格/高功能
    電流高達10A


規格: 

1. Typical Sample Rate and Resolution
Sample Rate Resolution Reading Rate Hum Rejection
SLOW 5.5-digit approx. 4 times/sec Yes
MID 5.5-digit approx. 20 times/sec Yes
FAST 4.5-digit approx. 100 times/sec N/A
2. DC Volt (DCV)   50mV range is for the VOAC7523/7522 only.
Range Resolution Input Resistance Accuracy*
5.5-digit 4.5-digit SLOW/MID FAST
50mV 0.1µV 1µV 100MW or more 0.025+10 0.025+15
500mV 1µV 10µV 1000MW or more 0.012+5 0.012+10
5V 10µV 100µV 0.012+2 0.012+7
50V 100µV 1mV approx. 10MW 0.016+5 0.016+10
500V 1mV 10mV 0.016+2 0.016+7
1000V 10mV 100mV
The accuracy in the 50mV and 500mV ranges is specified after zero compensation through the REL operation.
Sample rate in the 50mV range
SLOW/MID: Approx. 0.5 times/sec, FAST: Approx. 50 times/sec
Max. input voltage: 50mV to 5V range ± 800V (continuous)
50V to 1000V range ± 1100V (continuous)
Resolution and noise rejection
Resolution Sample Rate NMRR CMRR
5.5-digit SLOW 55dB or more 120dB or more
5.5-digit MID 55dB or more 120dB or more
4.5-digit FAST 0dB 55dB or more
3. CH-B DC Volt (DCV)   VOAC7523/7520 only
Range Resolution Input Resistance Accuracy*
4.5-digit SLOW/MID FAST
5V 100µV CH-B:H to CH-B:L 10MW ± 3%
CH-B:H to CH-A:L 5MW ± 3%
CH-B:L to CH-A:L 5MW ± 3%
0.025+2 0.025+30
50V 1mV 0.025+8
300V 10mV 0.025+5
Max. input voltage: ± 300V between CH-A L and CH-B ± 300V
Resolution and noise rejection
Resolution Sample Rate NMRR CMRR Isolation between CH-A and CH-B
4.5-digit SLOW/MID 55dB or more 120dB or more 56dB or more
4.5-digit FAST 0dB 55dB or more
4. AC Volt (ACV, DC+ACV) detection of True RMS
     Up to 100kHz for VOAC7520/7521A
Range Resolution Measurement Range Input Resistance
5.5-digit SLOW MID/FAST
500mV 1µV 15Hz to 300kHz 200Hz to 300kHz less than approx.
1MW // 100pF
5V 10µV
50V 100µV
500V 1mV 45Hz to 100kHz 200Hz to 100kHz
750V 1mV 45Hz to 20kHz 200Hz to 20kHz
Accuracy: SLOW Sample (Sine wave)
Frequency Accuracy*
15Hz to 45Hz 0.5+150
45Hz to 100Hz 0.25+150
100Hz to 30kHz 0.2+150
30kHz to 100kHz 0.5+300
100kHz to 300kHz 2.5+1000
Coefficient to input other than sine wave
Crest Factor Frequency
1 to 1.5 1.5 to 2 2 to 3
15Hz to 30kHz 0.05% 0.15% 0.30%
30kHz to 300kHz 0.20% - -
Resnponse time
Sample Rate Resolution Reading Rate Response Time
SLOW 5.5-digit 4 times/sec less than 3 sec
MID/FAST 5.5-digit 20 times/sec less than 2 sec
Max. input voltage: 780Vrms, ± 1100V DC (continuous)
In the case of DC+ACV, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy digit.
Sample rate of FAST becomes the same values as MID (approx. 20 times/sec).
5. DC Current (DCA)
Range Resolution Accuracy* Input Resistance
5.5-digit 4.5-digit SLOW/MID FAST
5mA 10nA 100nA 0.05+7 0.05+17 less than 150W
50mA 100nA 1µA less than 15W
500mA 1µA 10µA less than 2W
10A 100µA 1mA 0.2+7 0.2+17 less than 0.1W
Auto range is not available at 5mA to 500mA range and 10A range because of using different input terminals.
Max. input current: 5mA to 500mA range 500mA (FUSE 0.5A/250V)
10A range 10A (FUSE 15A/250V)
6. AC Current (ACA, DC+ACA)
Range Resolution Measurement Range Input Resistance
5.5-digit SLOW/MID FAST
5mA 10nA 15Hz to 5kHz 200Hz to 5kHz less than 150W
50mA 100nA less than 15W
500mA 1µA 45Hz to 5kHz less than 2W
10A 100µA less than 0.1W
Accuracy: SLOW Sample (Sine wave) 5% or more against the range
Frequency Accuracy* Crest Factor
1 to 1.5 1.5 to 2 2 to 3
15Hz to 45Hz 1+200 0.05% 0.15% 0.30%
45Hz to 1kHz 0.4+200
1kHz to 5kHz 5.0+200
Response time
Sample Rate Resolution Reading Range Response time
SLOW 5.5-digit 4 times/sec less than 3 sec
MID/FAST 5.5-digit 20 times/sec less than 2 sec
Max. input current: 5mA to 500mA range 500mA (FUSE 0.5A)
10A range 10A (FUSE 15A)
DC Component on input current must be included in the Max. input current.
In the case of 10A range at 45Hz to 1kHz, 0.3 must be added to %.
In the case of DC+ACA, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy digit.
Sample rate of FAST becomes the same value as MID (approx. 20 times/sec).
7. Resistance (2 WireW/4 WireW)   4 WireW: VOAC7522/7521A only
Range Resolution Accuracy* Test Current
SLOW/MID FAST SLOW/MID FAST
50W 0.1mW 1mW 0.025+10 0.025+15 approx. 10mA
500W 1mW 10mW 0.014+3 0.014+8 approx. 10mA
5kW 10mW 0.1W approx. 1mA
50kW 0.1W 1W approx. 100µA
500kW 1W 10W 0.015+3 0.015+33 approx. 10µA
5MW 10W 10W 0.033+30 0.033+30 approx. 1µA
50MW 100W 100W 0.25+30 0.25+30 approx. 100nA
500MW 1kW 1kW 1.5+50 1.5+50 approx. 10nA
Max. input voltage: ± 500V peak Open circuit test voltage: less than 12V
The accuracy at 50W to 5kW range are specified after zero compensation through the REL operation.
Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec).
8. Low-Power Resistance (2 WireW)
Range Resolution Accuracy* Test Current
SLOW/MID/FAST SLOW/MID FAST
500W 10mW 0.1+5 0.1+15 approx. 1mA
5kW 0.1W approx. 100µA
50kW 1W approx. 10µA
500kW 10W 0.2+30 0.2+40 approx. 1µA
5MW 100W 0.2+30 approx. 100nA
50MW 1kW 1.5+30 1.5+30 approx. 10nA
Max. input voltage: ± 500V peak Open circuit test voltage: less than 12V
The accuracy at 500W to 5kW range are specified after zero compensation through the REL operation.
Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec).
Indications are in 4.5 digits for SLOW, MID, and FAST.
9. Diode
Test Current Measurement Range Accuracy* Open Circuit Test Voltave Max. Input Voltave
approx. 1mA or 10mA 0.1mV to 5.0999V 0.014+13 less than 12V ± 500V peak
10. Temperature
Thermocouple Temperature Range to be Measured Accuracy* Resolution Max. Input Voltave
R -50 to 0°C 0.2+70 0.1°C ± 500V peak
0 to +100°C 0.2+50
+100 to +1768°C 0.2+30
K(CA) -270 to -100°C 0.15+50
-100 to 0°C 0.15+35
0 to +1372°C 0.15+20
T(CC) -270 to -100°C 0.15+50
-100 to 0°C 0.15+35
0 to +400°C 0.15+20
J(IC) -210 to -100°C 0.15+50
-100 to 0°C 0.15+35
0 to +1200°C 0.15+20
E(CRC) -270 to -100°C 0.15+50
-100 to 0°C 0.15+35
0 to +1000°C 0.15+20
The above accuracy values do not include the thermocouple accuracy.
±0.1°C/°C is added (for all thermocouples) with the operating ambient temperature of this product at 0°C to 18°C and 28°C to 50°C.
±0.3°C/°C is added (for all thermocouples) in the temperature range to be measured at -200°C or lower.
The reference thermo electric force is calculated by the broken line approximation according to JIS C 1602-1995.
If this product and the thermocouple are connected via a plug, an error for contact temperature compensation is added.
11. Frequency (AC couple, Crest Factor: less than 3)
 

IWATSU | KIKUSUI | MEGURO | SANWA | DATA TRANSLATION | SENSORAY | Curve Tracer
Copyrights Reserved 佳位科技 | 地址:台北市長安東路一段23號7樓 | 電話:+886-2-25612211 | 傳真:+886-2-25415840